Ashirvad SWR 45° Bend PUSHFIT

Overview

The Ashirvad SWR 45° Bend joins drainage pipes at a 45-degree angle, giving a gentler direction change than a 90° bend — useful where a sharp turn would restrict flow or where the pipe run needs to step around an obstruction at an angle.

Key Specifications

• Material: PVC (SWR grade)
• Angle: 45 degrees
• Joint type: PUSHFIT
• Available sizes: 3 inch (75mm) and 4 inch (110mm)

Available Sizes

• 4 inch (110mm) — for soil/toilet line angled direction changes.
• 3 inch (75mm) — for basin/sink waste line angled direction changes.

How to Use

1. Apply Ashirvad rubber lubricant to the socket ends.
2. Push the bend fully onto the pipe ends on both sides until seated.
3. Support the fitting to keep the pipe run aligned before concealing.

Frequently Asked Questions

When should I use a 45° bend instead of a 90° bend?
A 45° bend gives a gentler flow path, often preferred on horizontal runs to reduce the chance of blockages compared to a sharp 90° turn.

Is this a PUSHFIT joint like the other SWR fittings?
Yes, it uses the same rubber-seal PUSHFIT joint as the rest of the Ashirvad SWR range.

Why Buy From Buildenza

Genuine Ashirvad product, delivered by Buildenza in 60 minutes across our Kondapur/IT Corridor delivery zone.