Ashirvad SWR Pipe Single Socket 3 mtr Length PUSHFIT

Overview

The Ashirvad SWR Pipe with a single socket end is a uPVC drainage pipe supplied in 3-metre lengths, used for soil, waste, and rainwater drainage lines. The single-socket, pushfit design lets it join directly to the next fitting or pipe without solvent cement at that end, speeding up assembly on site.

Key Specifications

• Material: uPVC (SWR grade)
• End type: Single socket, PUSHFIT joint
• Length: 3 metres
• Use: Soil, waste, and rainwater drainage lines
• Available sizes: 3 inch (75mm) and 4 inch (110mm)

Available Sizes

• 3 inch (75mm) — for waste water lines from wash basins, kitchen sinks, and smaller drainage runs.
• 4 inch (110mm) — for soil (toilet) lines and main vertical drainage stacks needing higher flow capacity.

How to Use

1. Cut the pipe to the required length if needed, deburring the cut edge.
2. Apply Ashirvad rubber lubricant to the socket and pipe end for smooth pushfit assembly.
3. Push the plain end fully into the socket of the adjoining pipe or fitting until it seats.
4. Support the pipe run with clamps at regular intervals as per standard plumbing practice.

Frequently Asked Questions

Do I need solvent cement for this joint?
No, PUSHFIT joints use a rubber seal and lubricant rather than solvent cement at the socket end.

Which size do I need for a toilet line?
Use the 4 inch (110mm) size for soil/toilet lines; 3 inch (75mm) is typically used for basin and sink waste lines.

Why Buy From Buildenza

Genuine Ashirvad product, delivered by Buildenza in 60 minutes across our Kondapur/IT Corridor delivery zone.