Ashirvad-grade CPVC coupler/socket fitting for joining two pipe lengths.
STRAIGHT COUPLING — Joins two lengths of CPVC pipe of the same size in a straight run.
SOLVENT-WELD BOTH ENDS — Both ends join with CPVC Solvent Cement for a permanent seal.
COMPACT SOCKET FITTING — Low-profile design that doesn't add unnecessary bulk to the line.
Specifications
Brand
Ashirvad
Material
CPVC
Available Sizes
3/4 inch, 1 inch, 1 1/4 inch, 1 1/2 inch, 2 inch
Connection Type
Solvent Weld
How to Use
1. Cut & Deburr — Cut the CPVC pipe square with a hacksaw or pipe cutter, then deburr the edge and lightly chamfer it so it seats fully into the fitting.
2. Dry-Fit — Test-fit the pipe and fitting without cement to confirm alignment and depth before applying any adhesive.
3. Apply Solvent Cement — Apply Ashirvad CPVC Solvent Cement evenly to both the pipe end and the inside of the fitting socket.
4. Join & Hold — Push the pipe fully into the fitting with a quarter-turn, align it correctly, and hold for 30 seconds while the joint sets.
5. Cure Before Pressure Testing — Let the joint cure per the cement's instructions before pressurizing the line — usually a few hours for handling, longer for full pressure.
FAQ
Q: Can I use this to repair a damaged section of pipe? A: Yes — cut out the damaged section and join the new piece with couplers on each side.
Delivery and returns
Delivered in 60 min in Kondapur and the IT Corridor. Free delivery above ₹5,000. Damaged or wrong items are replaced if reported within 4 hours of delivery; cut lengths cannot be returned.
