CPVC Elbow 90° (Brass Threaded) - Buildenza

CPVC Elbow 90° (Brass Threaded)

3/4" x 1/2"
₹72.00 ₹137.00
Skip to product information
CPVC Elbow 90° (Brass Threaded) - Buildenza
  • CPVC Elbow 90° (Brass Threaded) - Buildenza
CPVC Elbow 90° (Brass Threaded)

CPVC Elbow 90° (Brass Threaded)

₹137.00 ₹72.00
Taxes included. Shipping calculated at checkout.
In stock
Size

Best For

Taps & Shower Arm Connections 90-Degree Fixture Turns Long-Term Durability
Description

The Ashirvad CPVC Elbow 90° with Brass Threaded outlet provides a strong right-angle threaded connection point on a CPVC pipeline. It combines corrosion-resistant CPVC piping with a durable brass thread, ideal for connecting fixtures such as taps and shower arms at a 90-degree turn.

  • CPVC ELBOW + BRASS THREADED OUTLET — One end solvent-welds to CPVC pipe; the outlet has a brass thread at 90 degrees.
  • HYBRID DURABILITY — Combines CPVC's corrosion resistance with brass's threading reliability.
  • IDEAL FOR SHOWER ARMS & TAPS — The standard fitting for bringing a CPVC line out to a wall-mounted tap or shower arm.
Specifications
Brand Ashirvad
Material Brass + CPVC
Available Sizes 3/4 inch x 1/2 inch, 3/4 inch x 3/4 inch, 1 inch x 1/2 inch, 1 inch x 3/4 inch, 1 inch x 1 inch
Connection Type Brass Thread + Solvent Weld
How to Use

1. Cut & Deburr — Cut the CPVC pipe square with a hacksaw or pipe cutter, then deburr the edge and lightly chamfer it so it seats fully into the fitting.

2. Dry-Fit — Test-fit the pipe and fitting without cement to confirm alignment and depth before applying any adhesive.

3. Apply Solvent Cement — Apply Ashirvad CPVC Solvent Cement evenly to both the pipe end and the inside of the fitting socket.

4. Join & Hold — Push the pipe fully into the fitting with a quarter-turn, align it correctly, and hold for 30 seconds while the joint sets.

5. Cure Before Pressure Testing — Let the joint cure per the cement's instructions before pressurizing the line — usually a few hours for handling, longer for full pressure.

6. Wrap the Threaded End — Wrap 2-3 turns of Teflon tape clockwise around the male thread before connecting the fixture.

FAQ

Q: Do I need Teflon tape on the brass outlet?
A: Yes — wrap the fixture's male thread with Teflon tape before connecting.

You may also like