Ashirvad CPVC Flowguard Plus Pipe SDR-11 | 3 Metre Length - Buildenza

Ashirvad CPVC Flowguard Plus Pipe SDR-11 | 3 Metre Length

3/4"
₹265.00 ₹529.00
Skip to product information
Ashirvad CPVC Flowguard Plus Pipe SDR-11 | 3 Metre Length - Buildenza
  • Ashirvad CPVC Flowguard Plus Pipe SDR-11 | 3 Metre Length - Buildenza
Ashirvad CPVC Flowguard Plus Pipe SDR-11 | 3 Metre Length

Ashirvad CPVC Flowguard Plus Pipe SDR-11 | 3 Metre Length

₹529.00 ₹265.00
Taxes included. Shipping calculated at checkout.
In stock
Size

Best For

Hot & Cold Water Lines Residential Plumbing Commercial Plumbing New Construction
Description

Ashirvad FlowGuard Plus CPVC plumbing pipe for hot & cold water supply lines, 3 metre length.

  • HOT & COLD WATER RATED — Ashirvad FlowGuard Plus CPVC pipe, safe for both hot and cold water distribution lines.
  • CORROSION-RESISTANT — CPVC won't rust, scale, or corrode the way metal pipe does over time.
  • STANDARD 3 METRE LENGTH — Supplied in 3-metre lengths, cut to size on site as needed.
  • SOLVENT-WELD JOINTS — Joins with CPVC Solvent Cement for a permanent, leak-proof connection.
  • DELIVERED FAST — Delivered by Buildenza to your site in 60 minutes, within our Hyderabad service zone.
Specifications
Brand Ashirvad
Material Flow Guard Plus CPVC
Available Sizes 3/4 inch, 1 inch, 1 1/4 inch, 1 1/2 inch, 2 inch
Connection Type Solvent Weld
How to Use

1. Cut & Deburr — Cut the CPVC pipe square with a hacksaw or pipe cutter, then deburr the edge and lightly chamfer it so it seats fully into the fitting.

2. Dry-Fit — Test-fit the pipe and fitting without cement to confirm alignment and depth before applying any adhesive.

3. Apply Solvent Cement — Apply Ashirvad CPVC Solvent Cement evenly to both the pipe end and the inside of the fitting socket.

4. Join & Hold — Push the pipe fully into the fitting with a quarter-turn, align it correctly, and hold for 30 seconds while the joint sets.

5. Cure Before Pressure Testing — Let the joint cure per the cement's instructions before pressurizing the line — usually a few hours for handling, longer for full pressure.

FAQ

Q: Can I use this pipe for both hot and cold water?
A: Yes — Ashirvad CPVC Flow Guard Plus pipe is rated for both hot and cold water distribution lines.

Q: What do I need to join two lengths of this pipe?
A: CPVC Solvent Cement and the appropriate fittings (couplers, elbows, tees) for your layout.

Q: Does this come pre-cut to size?
A: It's supplied in standard 3-metre lengths — cut to the length you need on site.

You may also like