CPVC Reducing Male Adaptor Brass Thread (MABT) - Buildenza

CPVC Reducing Male Adaptor Brass Thread (MABT)

3/4" x 1/2"
₹127.00 ₹242.00
Skip to product information
CPVC Reducing Male Adaptor Brass Thread (MABT) - Buildenza
  • CPVC Reducing Male Adaptor Brass Thread (MABT) - Buildenza
CPVC Reducing Male Adaptor Brass Thread (MABT)

CPVC Reducing Male Adaptor Brass Thread (MABT)

₹242.00 ₹127.00
Taxes included. Shipping calculated at checkout.
In stock
Size

Best For

Smaller Metal Threaded Outlets Taps & Valves Long-Term Durability
Description

The Ashirvad CPVC Reducing Male Adaptor Brass Thread (MABT) joins a larger CPVC pipe socket to a smaller brass male threaded outlet, combining the corrosion resistance of CPVC with the strength of brass threading. It is ideal for connecting taps, valves and fixtures that require a smaller threaded size than the supply line.

  • SIZE-REDUCING BRASS ADAPTOR — Connects a larger CPVC socket to a smaller brass male threaded outlet.
  • HYBRID DURABILITY — Combines CPVC's corrosion resistance with brass's threading strength.
  • FOR SMALLER METAL FIXTURES — Used where the fixture's threaded connection is smaller than the supply line.
Specifications
Brand Ashirvad
Material Brass + CPVC
Available Sizes 3/4 inch x 1/2 inch, 1 inch x 1/2 inch, 1 inch x 3/4 inch
Connection Type Brass Thread + Solvent Weld
How to Use

1. Cut & Deburr — Cut the CPVC pipe square with a hacksaw or pipe cutter, then deburr the edge and lightly chamfer it so it seats fully into the fitting.

2. Dry-Fit — Test-fit the pipe and fitting without cement to confirm alignment and depth before applying any adhesive.

3. Apply Solvent Cement — Apply Ashirvad CPVC Solvent Cement evenly to both the pipe end and the inside of the fitting socket.

4. Join & Hold — Push the pipe fully into the fitting with a quarter-turn, align it correctly, and hold for 30 seconds while the joint sets.

5. Cure Before Pressure Testing — Let the joint cure per the cement's instructions before pressurizing the line — usually a few hours for handling, longer for full pressure.

6. Wrap the Threaded End — Wrap 2-3 turns of Teflon tape clockwise around the male thread before connecting the fixture.

FAQ

Q: Do I need Teflon tape with this fitting?
A: Yes — wrap the brass male thread with Teflon tape before connecting.

You may also like