Threaded End Plug - Buildenza

Threaded End Plug

1/2"
₹9.00 ₹14.00
Skip to product information
Threaded End Plug - Buildenza
  • Threaded End Plug - Buildenza
Threaded End Plug

Threaded End Plug

₹14.00 ₹9.00
Taxes included. Shipping calculated at checkout.
In stock
Size1/2"

Best For

Removable Line Closures Cleanout Access Points Future Expansion Provisions
Description

Ashirvad Flowguard Plus Threaded End Plug provides a removable seal for female threaded connections in CPVC plumbing systems. Unlike solvent-welded end caps that are permanent, this threaded plug can be unscrewed and removed when access is needed, making it ideal for cleanout points, future expansion provisions, and temporary closures. The male threaded design screws into female threaded adapters (FABT) or other female threaded fittings.

  • REMOVABLE SEAL — Unlike a solvent-welded end cap, this plug can be unscrewed and removed when access is needed.
  • MALE THREAD DESIGN — Screws directly into female threaded adaptors (FABT) or other female threaded fittings.
  • IDEAL FOR CLEANOUTS & FUTURE TAPS — Use where you may need to reopen the line later, rather than a permanent cap.
Specifications
Brand Ashirvad
Material CPVC
Available Sizes 1/2"
Connection Type Male Thread
How to Use

1. Cut & Deburr — Cut the CPVC pipe square with a hacksaw or pipe cutter, then deburr the edge and lightly chamfer it so it seats fully into the fitting.

2. Dry-Fit — Test-fit the pipe and fitting without cement to confirm alignment and depth before applying any adhesive.

3. Apply Solvent Cement — Apply Ashirvad CPVC Solvent Cement evenly to both the pipe end and the inside of the fitting socket.

4. Join & Hold — Push the pipe fully into the fitting with a quarter-turn, align it correctly, and hold for 30 seconds while the joint sets.

5. Cure Before Pressure Testing — Let the joint cure per the cement's instructions before pressurizing the line — usually a few hours for handling, longer for full pressure.

FAQ

Q: How is this different from a standard CPVC end cap?
A: An end cap is permanently solvent-welded; this plug threads in and can be removed later for access or future expansion.

Q: Do I need Teflon tape on the plug's thread?
A: Yes — wrap the male thread with Teflon tape before installing.

You may also like