Ashirvad SWR Coupler PUSHFIT

Overview

The Ashirvad SWR Coupler joins two plain-end drainage pipes of the same diameter, used whenever a straight pipe run needs to be extended or a damaged section needs to be spliced in.

Key Specifications

• Material: PVC (SWR grade)
• Joint type: PUSHFIT
• Use: Joining two same-diameter plain-end pipes in a straight run
• Available sizes: 3 inch (75mm) and 4 inch (110mm)

Available Sizes

• 4 inch (110mm) — for extending or splicing soil/toilet line pipe runs.
• 3 inch (75mm) — for extending or splicing basin/sink waste line runs.

How to Use

1. Apply Ashirvad rubber lubricant to both sockets of the coupler.
2. Push each pipe end fully into the coupler from either side until seated.
3. Ensure both pipes are aligned straight before final fixing/support.

Frequently Asked Questions

When would I use a coupler instead of a bend?
A coupler joins two straight, in-line pipe ends of the same diameter — use a bend instead when the pipe run needs to change direction.

Can this splice in a repair section of pipe?
Yes, couplers are commonly used to join a new section of pipe when repairing a damaged run.

Why Buy From Buildenza

Genuine Ashirvad product, delivered by Buildenza in 60 minutes across our Kondapur/IT Corridor delivery zone.