Ashirvad SWR Plain Bend PUSHFIT

Overview

The Ashirvad SWR Plain Bend is a PVC fitting used to change the direction of drainage flow between two SWR pipes, typically a 90-degree turn where a drainage line needs to change direction around a wall or obstruction.

Key Specifications

• Material: PVC (SWR grade)
• Joint type: PUSHFIT
• Use: Changing direction in soil, waste, and rainwater drainage lines
• Available sizes: 3 inch (75mm) and 4 inch (110mm)

Available Sizes

• 4 inch (110mm) — for soil/toilet line direction changes.
• 3 inch (75mm) — for basin, sink, and smaller waste line direction changes.

How to Use

1. Apply Ashirvad rubber lubricant to the socket ends.
2. Push the bend fully onto the pipe ends on both sides until they seat.
3. Support the fitting so the pipe run stays aligned before backfilling or concealing.

Frequently Asked Questions

What angle does this bend cover?
It's used for standard direction changes in a drainage run — pick the diameter matching your existing pipe line.

Do I need cement for this joint?
No, it's a PUSHFIT joint — use rubber lubricant rather than solvent cement.

Why Buy From Buildenza

Genuine Ashirvad product, delivered by Buildenza in 60 minutes across our Kondapur/IT Corridor delivery zone.