CPVC Elbow 90° - Buildenza

CPVC Elbow 90°

3/4"
₹17.00 ₹30.00
Skip to product information
CPVC Elbow 90° - Buildenza
  • CPVC Elbow 90° - Buildenza
CPVC Elbow 90°

CPVC Elbow 90°

₹30.00 ₹17.00
Taxes included. Shipping calculated at checkout.
In stock
Size

Best For

Directional Pipe Turns Residential Plumbing Commercial Plumbing
Description

Ashirvad-grade CPVC 90-degree elbow fitting.

  • 90-DEGREE DIRECTIONAL FITTING — Turns a CPVC line a full 90 degrees without kinking or restricting flow.
  • SOLVENT-WELD BOTH ENDS — Both socket ends join with CPVC Solvent Cement for a permanent seal.
  • CORROSION & HEAT RESISTANT — Holds up to hot and cold water lines without degrading.
Specifications
Brand Ashirvad
Material CPVC
Available Sizes 3/4 inch, 1 inch, 1 1/4 inch, 1 1/2 inch, 2 inch
Connection Type Solvent Weld
How to Use

1. Cut & Deburr — Cut the CPVC pipe square with a hacksaw or pipe cutter, then deburr the edge and lightly chamfer it so it seats fully into the fitting.

2. Dry-Fit — Test-fit the pipe and fitting without cement to confirm alignment and depth before applying any adhesive.

3. Apply Solvent Cement — Apply Ashirvad CPVC Solvent Cement evenly to both the pipe end and the inside of the fitting socket.

4. Join & Hold — Push the pipe fully into the fitting with a quarter-turn, align it correctly, and hold for 30 seconds while the joint sets.

5. Cure Before Pressure Testing — Let the joint cure per the cement's instructions before pressurizing the line — usually a few hours for handling, longer for full pressure.

FAQ

Q: Does this fitting work on both hot and cold lines?
A: Yes, it's rated for both.

Q: What size pipe does this fit?
A: Match the fitting size to your pipe's outer diameter — see the size options above.

You may also like