MYK Tile Spacers Packet (100 Nos)

Overview

MYK Tile Spacers are yellow plastic spacers used to maintain consistent gaps between tiles during installation, so grout lines come out even across the whole floor or wall. Each pack holds 100 pieces, enough for a full room's worth of tiling, and they're removed before the adhesive fully cures.

Key Specifications

• Material: Plastic (yellow)
• Pack size: 100 pieces per packet
• Available thicknesses: 2mm, 3mm, and 4mm
• Use: Maintaining even joint width between ceramic and vitrified tiles during laying

Available Sizes

• 2mm — for tight, minimal-line joints, common with large-format or rectified tiles.
• 3mm — a common mid-size joint width used in most standard ceramic and vitrified tile installations.
• 4mm — for wider joint lines, often used with rustic or textured-edge tiles.

How to Use

1. After applying tile adhesive, place a tile and insert spacers at the corners/edges against the adjacent tile.
2. Continue laying tiles with a spacer at each joint to keep spacing consistent.
3. Remove the spacers before the adhesive fully sets, typically within a few hours, before grouting.

Frequently Asked Questions

Which size spacer should I use?
3mm is the most common choice for standard tiling; use 2mm for a tighter, minimal-line look or 4mm for wider joints, often with rustic-edge tiles.

Do I need to remove the spacers?
Yes, remove them before the adhesive fully cures and before grouting the joints.

Why Buy From Buildenza

Genuine MYK product, delivered by Buildenza in 60 minutes across our Kondapur/IT Corridor delivery zone.